No products in the cart.
Federal Premium Gold Medal Large Rifle Match Primers #210M Box of 1000 (10 Trays of 100)
Roll over image to zoom in
Federal Rifle Primers
Gold Medal Large Rifle Match Primers #210M Box of 1000 (10 Trays of 100)
Quantity 1000 Piece
Primer Size Large Rifle
I saw episode of Shooting USA once and they did a tour of Federal ammo factory. The only difference with the match grade primers is they had 3 of their most experienced workers doing those primers, same priming compound they just know how to make them better, more consistent when they apply mixture. I use match for precision rifle shooting, but whatever I can get for pistol. I saw episode of Shooting USA once and they did a tour of Federal ammo factory. The only difference with the match grade primers is they had 3 of their most experienced workers doing those primers, same priming compound they just know how to make them better, more consistent when they apply mixture. I use match for precision rifle shooting, but whatever I can get for pistol.
July 21, 2020
While working my way through college at a local gun shop, I advised a customer frustrated with his inaccurate handloads to try match-grade primers. He bought a 100 pack of Federal Gold Medal caps, and the next week he came back brimming with enthusiasm: “Changing primers turned my rifle from a two-inch gun to a three-quarter-inch gun,” he said.
I’ve always been the type to walk the extra mile for anything that might have an effect on performance, and I’ve always purchased match-grade primers. They’re only a few bucks more per 1,000, and the peace of mind I get by knowing I’m leaving no stone unturned in my search for precision makes the cost worth it.
But do match-grade primers really make a difference? To find out, I recently performed a comparison test with two different rifles.
The first was my old go-to Winchester Model 70 in .30-06. It was customized years ago by Hill Country Rifles and has a Lilja barrel. The second is my favorite PRS rifle, a GA Precision in 6mm Creedmoor with a Bartlein barrel.
For the .30-06, I loaded five different test batches of ammunition, all using Nosler cases charged with 55 grains of Reloder 16 and topped with 175-grain Barnes LRX bullets. The only difference was the Large Rifle primers, of which there were five different types: Federal 210 standard, Federal 210 Gold Medal, CCI No. 200 standard, CCI BR-2 benchrest-grade and Winchester WLR standard.
For the 6mm Creedmoor, I also loaded five batches. Each used new Peterson brass with Small Rifle primer pockets and charged with 40 grains of Reloder 16. I used Hornady 110-grain A-Tip bullets.
Like the .30-06 test loads, I used both standard and Gold Medal grade Federal primers, and standard and benchrest grade CCI primers. For the fifth test batch, I used Remington No. 6½ Small Rifle standard primers.
Each test batch consisted of 10 rounds, which I fired in two consecutive five-shot groups, clocking the full 10-round string using a LabRadar. Conditions at the range were questionable, with wind gusting to 12 mph and temperatures hovering at a finger-numbing 25 degrees. At least the barrels cooled quickly.
Results were a little unanticipated, although one difference emerged almost immediately. I started with the .30-06 because it needed to cool completely between five-shot groups. The Creedmoor’s heavy match barrel doesn’t and historically has grouped a bit tighter during the second five-shot group in a 10-round string.
Reviews
There are no reviews yet.