6.5 Grendel Brass, Lapua World-class brass begins with high-quality raw materials and superior smelting and metallurgical competence. Throughout the production process, the focus on quality control is consistent with Lapua’s exacting standards. Particular attention is paid to hardness, solidity and grain structure. All Lapua brass is tested to 30% overpressure according to Commission Internationale Permanente, the agency that oversees ammunition and component producers in Western Europe. This is not loaded ammunition.

6.5 Grendel Brass

Brass Preparation: With bulk rifle brass you may sometimes notice a few case mouths are “out of round” or slightly dented below the shoulder.  These imperfections occur in the final tumbling wash operation after the case mouth has been annealed.  Brass manufacturers are aware of the case cosmetics and have worked to mitigate it, but due to equipment design, denting may still occur.  Minor dents are normally removed in the first firing and will not affect case life or performance.  On non-plated brass, you may also notice all the anneal stain might not be polished off, which may give the case neck a pinkish color.  With some smaller caliber cases you may notice the case mouths to be slightly belled.

6.5 grendel brass once fired

To prevent the case neck from stretching, be sure to lubricate the case neck inside the case mouth.

Specifications

Community Q&A allows you to connect with other customers to ask or answer questions about products. The information provided through Community Q&A is provided by customers like you and is based on other customers’ personal experiences. TRANSTECH does not verify, control, endorse, or take responsibility for information provided through Community Q&A. By using Community Q&A, you agree to TRANSTECH’s Terms of Service

6.5 grendel once fired brass

6.5 grendel brass in stock